Jump to content


Bagaimana nak format PC?


15 replies to this topic

#1 Guest_aty_na_*

  • Tetamu

Posted 19 June 2002 - 11:21 AM

Assalamualaikum kepada semua ...semoga success sokmo...

rasanya tajuk nya dah menceritakan masalah saya.....


terima kasih atas bantuan anda semua..... :wink:

#2 Guest_ephol_*

  • Tetamu

Posted 19 June 2002 - 11:42 AM

nak format PC.... ermm... ok.

step yg saya tunjuk ni kalau pakai win 95/98/me

1) memula sekali create boot disk... (nak boot pakai cd pun boleh)
2) restart komputer - boot pakai boot disk yg baru buat tadi tu
3) run fdisk
4) delete partion pastu creat partion.... (ni tak detail)
5) restart - guna boot disk tu gak
6) format drive c
7) install OS
8) install driver untuk sound, graphic etc....
9) configure
10) install la software software lain

tu je la rasa nya...

kalau ader sesapa yg nak tambah.. silakan... takut ader yg tertinggal lak.... aku ni nak menerangkan teori lemah ckit... praktikalnya ok.

#3 eastone

    Leftenan Muda

  • Ahli
  • 668 posts
  • Gender:Male
  • Location:K.L
  • Interests:I.T, Photography, Bowling, Music, Multimedia.
  • Freelance:Tidak

Posted 19 June 2002 - 04:49 PM

hmmm...sedara ephol dah menerangkan caranyer...
tapi kalau sedari aty_na tak paham gak...
tanyer la...ape yg tak paham...
sebab kat forum ni banyak hustler yg baik hati
serta tak kedekut ilmu..
sebelum format tu save dulu fail2 yg nak pakai kat tempat lain cam disket , zip dsb...
tenkiu....

#4 mAnKuAnTaN

    Leftenan

  • Ahli
  • 1,474 posts
  • Gender:Male
  • Location:KeY ELL
  • Interests:komputer dan internet
  • Kepakaran:digital gedget
  • Freelance:Ya

Posted 19 June 2002 - 09:19 PM

ephol dah jawab, tapi try aku jawap pulak...

Nak install software (kat sini akan diterangkan cam ner nak pasang Windows 98 sajer laa.... OS lain kena tanya orang lain)...

Nak install sofware (win98) nie bukannya susah sangat... Alatan yang di perlukan ialah...
1.CD ROM Windows 98
2.Start-up disk Windows 98...
Pastikan semua mender tu cukup... pas tu barulah boleh start install sofware sendiri (Win98)

1.Mula2 masukkan disket start-up disk ke dalam floppy drive...

2.On kan suis PC dan tunggu sehingga menu windows 98 sturt up...

3.Sekarang pilih menu start without CD ROM support (iaitu pilihat kedua)

4.Tunggu sehingga menu A> keluar...

5.Selepas a> dah keluar taipkan 'fdisk'...

6.Menu untuk fix-disk akan keluar... pilihkan menu display partition... kalau ada patition removekan partition tadi... (delete)...

7.Kemudian buat pilihan untuk create partition baru...

8.Setelah partition telah di reka... rebote komputer semula dengan membiarkan start-up disk di dalam floppy drive...

9.Ikuti seperti langkah tadi sehingga menu A> di display kembali...

10.Sekarang taipkan pula 'format C:/s' untuk memformat kembali hard disk tersebut... termasuk memasukkan fail system ke dalamnya...

11.Tekan Y untuk pilihan Yes setelah di tanya untuk berbuat begitu...

12.Tunggu sehingga format selesai 100%... lebelkan drive C: (jika mahu) atau terus tekan enter untuk membiarkan ianya tidak di lebel...

13.Selepas itu reboot semula komputer...

14.Kali ini gunakan start withh cd rom support untuk mengaktifkan cd rom anda secara automatik....

15.Selepas skrin menunjukkan 'a>', taipkan 'e:' untuk pemacu cd rom.

16.Selepas skrin menunjukkan tanda 'e>'.

17.Lihat directory di drive e: dengan menaipkan e>dir/w

18.Kemudian taipkan pula cd win98

19.Apabila memasuki folder win98 taipkan pula 'setup'

20.Ikuti langkah setup win98 sehingga selesai...

21.Proses setup ini akan mengambil masa selama 30 minit... (mengikut jenis sistem komputer yang anda gunakan)

22.Setelah selesai... anda boleh menggunakan win98 ini... Selamat Mencuba...

Bila dah siap install windows 98 nie senang lah kita nak install bende2 yang lain...

Install display card, sound card, modem, MPEG card, printer, scanner dan periferal yang lain.

Aku copy n paste dari site lama aku nih, maybe tak up to date... tapi maybe boleh buat panduan utk korang...

#5 Guest_ephol_*

  • Tetamu

Posted 21 June 2002 - 09:42 AM

mankuantan punya ni lagi detail.... kat bahagian fdisk pun detail giler..... kihkihkihkihkih.... aku malas detail detail sgt nih

#6 Guest_cmos_*

  • Tetamu

Posted 21 June 2002 - 12:16 PM

Herm saya rasa apa yang kamu inginkan dah terjawap sepenuhnya secara detil laugh.gif hehehe...tak ya la aku nak peninkan kepala..hehhee adioss

#7 Guest_waikiki_*

  • Tetamu

Posted 21 June 2002 - 04:23 PM

trimas pada semua yang sudi membantu....

wassalam.

#8 Pejal

    Sarjan

  • Ahli
  • 116 posts
  • Location:Kuala Lumpur
  • Interests:cari masalah

Posted 21 June 2002 - 05:09 PM

:oops: baru nak tolong hehehe dah ramai yg membantu rupanya...hehehhe

Nak install sofware (win98) nie bukannya susah sangat... Alatan yang di perlukan ialah...
1.CD ROM Windows 98
2.Start-up disk Windows 98...
3.tertinggal satu kalau boleh sediakan drive utk Motherboard,sound,AGP,modem,dan sebagainya kalau tak ada kenalah download hehehe :wink: tu jer nak tambah yg lain tu kira dah lengkap rasanya
smile.gif2 selamat mencuba

#9 Guest_rosli33_*

  • Tetamu

Posted 21 June 2002 - 06:12 PM

aty_na...ko nak format pastu nak guna OS apa...
tapi tu la yg ponting....buat la backup dulu...

#10 mAnKuAnTaN

    Leftenan

  • Ahli
  • 1,474 posts
  • Gender:Male
  • Location:KeY ELL
  • Interests:komputer dan internet
  • Kepakaran:digital gedget
  • Freelance:Ya

Posted 22 June 2002 - 08:31 AM

Yang ni aku dpt dari Microsoft punya homepage!!!

How to Install Windows 98 on a Computer with No Operating System (Q221829)

--------------------------------------------------------------------------------
The information in this article applies to:


Microsoft Windows 98
Microsoft Windows 98 Second Edition


--------------------------------------------------------------------------------


SUMMARY
This article describes how to install Windows 98 on a computer with no operating system installed.

For information about how to install Microsoft Windows Millennium Edition (Me) on a computer with no operating system installed, visit the following Microsoft Web page:

http://support.microsoft.com/support/windo...nme/cleanhd.asp



MORE INFORMATION

Determine Which Product to Use
To install Windows 98, you must have one of the following products:
The "Microsoft Windows 98 Upgrade" product. This upgrade product is available on CD-ROM. When you use the Windows 98 Upgrade version, you must have a copy of the previous version of Windows on CD-ROM or on floppy disks for the compliance-check procedure during Setup. Make sure that you have your qualifying version of Windows on CD-ROM or on floppy disks before you run Setup. Note that you must also have a Windows 98 Startup disk to install this product.

For additional information about how to create a Windows 98 Startup disk, click the article number below to view the article in the Microsoft Knowledge Base:
Q187632 How to Create a Windows 98 Startup Disk that Supports FAT32
The "Microsoft Windows 98 for PCs Without Windows" product. This version is available on CD-ROM. A Windows 98 Startup disk is included with the product.


Minimum Hardware Requirements to Install Windows 98
The minimum hardware requirements include:
486DX 66-MHz or faster processor (Pentium recommended)


16 megabytes (MB) of memory (24 MB recommended)


195 MB of free hard disk space (the required space may vary from 120 MB to 295 MB, depending on your computer's configuration and the options you choose to install)


CD-ROM or DVD-ROM drive


3.5-inch high-density floppy disk drive


Video adapter and monitor that support VGA or higher resolution


Microsoft Mouse or compatible pointing device


For additional information about the minimum hardware requirements, click the article number below to view the article in the Microsoft Knowledge Base:
Q182751 Minimum Hardware Requirements for Windows 98
System Updates, Device Drivers, and Other Considerations
CMOS Antivirus Utility
It is important to disable any CMOS antivirus utility that is enabled on your computer before you run Setup. If you are not sure if this feature is enabled on your computer, view the documentation that is included with your computer, or contact the computer manufacturer.
Drive Overlay Software
If your computer uses drive overlay software to enable large hard disk support, the drive overlay software must be installed before you install Windows 98. To install the drive overlay software, view the documentation that is included with the software or contact the software manufacturer.
System Updates and Device Drivers
To ensure that your hardware and software is compatible with Windows 98, verify that you have the latest drivers, Basic Input Output System (BIOS), or patches for your hardware and software before you run Setup.

If your computer uses proprietary hardware and you try to install Windows 98 on a clean hard disk, you may receive error messages. Before you install the retail or upgrade version of Windows 98 on your computer, check with the hardware manufacturer and verify that there are no known issues. Also, if your current version of Windows was preinstalled on your computer and was bundled with a software package that is on a Restore CD-ROM, you may not be able install the programs that are on the Restore CD-ROM. If this is the case, use the hardware manufacturer's Restore CD-ROM to install Windows 95 and the included programs first, and then run Setup from the Windows 98 Upgrade version. View your original hardware documentation if you are not sure how to run the Restore CD-ROM.

WARNING : When you run the Restore CD-ROM, it may delete all of the data on your hard disk.
Real-Mode CD-ROM Support
The Windows 98 Startup disk contains generic CD-ROM drivers that work with most CD-ROM drives. The Windows 98 Startup disk contains generic, real-mode ATAPI CD-ROM and small computer system interface (SCSI) drivers that can enable CD-ROM drives after you boot from the Windows 98 Startup disk. These CD-ROM drivers are not guaranteed to work with all CD-ROM drives. They may work as a replacement driver if the real-mode CD-ROM drivers that are included with your CD-ROM drive are not available. If these drivers do not work with your CD-ROM drive, view the documentation that is included with your hardware, or contact your hardware manufacturer.
How to Prepare the Hard Disk for the Windows 98 Installation Procedure
WARNING : The following information applies to preparing an empty hard disk for the installation of Windows 98. If you use the following steps on a hard disk that is not empty, all of the data that is on that hard disk is deleted.

Before you install Windows 98 on an empty hard disk, you must first create a primary partition and then format a file system on that partition. Each allocated space on the hard disk (primary partition or logical drive) is assigned a drive letter. Windows 98 supports the FAT16 and FAT32 file systems. When you run the Fdisk tool on a hard disk that is larger than 512 MB, you are prompted to choose a file system.

The FAT16 file system has a maximum of 2 gigabytes (GB) for each allocated space, or drive letter. For example, if you use the FAT16 file system and you have a 6-GB hard disk, you can have three drive letters (C, D, and E), each with 2 GB of allocated space.

The FAT32 file system supports drives up to 2 terabytes in size and stores files on smaller sections of the hard disk than does the FAT16 file system. This results in more free space on the hard disk. The FAT32 file system does not support drives that are smaller than 512 MB. For additional information about the FAT32 file system, click the article numbers below to view the articles in the Microsoft Knowledge Base:
Q154997 Description of the FAT32 File System
Q118335 Maximum Partition Size Using FAT16 File System
More information about file systems is also available in the "Getting Started" manual that is included with the Windows 98 CD-ROM.

For additional information about the Fdisk tool, click the article number below to view the article in the Microsoft Knowledge Base:
Q66706 The Four Steps Needed to Make a Hard Disk Usable
How to Partition the Hard Disk
After you decide which file system you want to use, run the Fdisk tool:
Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.


When the Microsoft Windows 98 Startup menu is displayed, choose the Start computer without CD-ROM support option, and then press ENTER.


At a command prompt, type fdisk , and then press ENTER.


If the hard disk is larger than 512 MB, you receive the following prompt:


Your computer has a disk larger than 512 MB. This version of Windows includes improved support for large disks, resulting in more efficient use of disk space on large drives, and allowing disks over 2 GB to be formatted as a single drive.

IMPORTANT: If you enable large disk support and create any new drives on this disk, you will not be able to access the new drive(s) using other operating systems, including some versions of Windows 95 and Windows NT, as well as earlier versions of Windows and MS-DOS. In addition, disk utilities that were not designated explicitly for the FAT32 file system will not be able to work with this disk. If you need to access this disk with other operating systems or older disk utilities, do no enable large drive support.

Do you wish to enable large disk support (Y/N)?
If you want to use the FAT32 file system, press Y, and then press ENTER. If you want to use the FAT16 file system, press N, and then press ENTER.


After you press ENTER, the Fdisk Options menu is displayed. Press 1 to select the Create DOS partition or Logical DOS Drive option, and then press ENTER.


Press 1 to select the Create Primary DOS Partition option, and then press ENTER.


After you press ENTER, you receive the following prompt:


Do you wish to use the maximum available size for primary DOS partition?
FAT32 File System:


If you chose the FAT32 file system in step 4 and you want all of the space on the hard disk to be assigned to drive C, press Y, and then press ENTER.


Press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt.


Skip to step 10.


FAT16 File System:


If you chose the FAT16 file system in step 4, and you want the first 2 GB on the hard disk to be assigned to drive C, press Y, and then press ENTER.


Press ESC to return to the Options menu, and then skip to step i.


If you want to customize the size of the partitions (the logical drives) on the hard disk, press N, and then press ENTER.


A prompt is displayed for you to type the size that you want for the primary partition in megabytes or percent of disk space. Note that for a Windows 98-based computer, Microsoft recommends that you make the primary partition at least 500 MB. Type the size of the partition that you want to create, and then press ENTER.


Press ESC to return to the Options menu.


Press 2 to select the Set active partition option, and then press ENTER.


When you are prompted to type the number of the partition that you want to make the active partition, press 1, and then press ENTER.


Press ESC to return to the Options menu.


To assign drive letters to the additional space on the hard disk:


Press 1, and then press ENTER.


Press 2 to select the Create Extended DOS Partition option, and then press ENTER.


The option that appears displays the maximum space that is available for the extended partition. You can adjust the size of the partition or you can use the default size. Note that the default maximum space is recommended, but the space can be divided between multiple drive letters. Type the amount of space that you want, press ENTER, and then press ESC.


The Create Logical DOS Drive(s) in the Extended DOS Partition menu is displayed. This is the menu that you use to assign the remaining hard disk space to the additional drive letters. Type the amount of space that you want to assign to the next drive letter at the Enter logical drive size in Mbytes or percent of disk space (%) prompt, and then press ENTER.


A table that lists the drive letter that you created and the amount of space that is on that drive is displayed. If there is still free space on the hard disk, it is displayed near the bottom of the table. Repeat steps 1 through 4 until you receive the following message:


All available space in the Extended DOS Partition is assigned to local drives
After you receive this message, press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt.


After you create the partitions, restart you computer with the Windows 98 Startup disk in the floppy disk drive.


When the Windows 98 Startup menu is displayed, choose the Start computer without CD-ROM support option, and then press ENTER.


When a command prompt is displayed, type format c: , and then press ENTER.

NOTE : If you receive a "Bad command or file name" message, you may need to extract the Format.com utility to your Startup disk. To do this, type the following command at a command prompt, and then press ENTER:


extract ebd.cab format.com
After the Format.com utility is extracted to your Startup disk and a command prompt is displayed, type format c: .


When you successfully run the Format.com utility, you receive the following prompt:


WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST!

Proceed with Format (Y/N)?
Press Y, and then press ENTER to format drive C.


After the format procedure is finished, you receive the following prompt:


Volume label (11 characters, ENTER for none)?
This is an optional feature that you can use to type a name for the hard disk. Type an 11-character name for the drive, or leave it blank, and then press ENTER.


Repeat steps 10 through 13 for any additional drive letters that you created in step i.


How to Install Windows 98
After you partition and format your hard disk, you can install Windows 98:
Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.


When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.


If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive:


Drive X : = Driver MSCD001

Drive X : = Driver OEMCD001
NOTE : If your CD-ROM drive is not available after you boot from the Windows 98 Startup disk, install the CD-ROM drivers that are included with your CD-ROM drive. For information about how to obtain and install the most current driver for your CD-ROM drive, view the documentation that is included with your device, or contact your hardware manufacturer.


Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER


X :setup
where X is the drive letter that is assigned to your CD-ROM drive.


When you receive the following message, press ENTER, and then follow the instructions on the screen to complete the Setup procedure:


Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.

#11 sniper

    Kapten

  • Pengendali
  • 1,695 posts
  • Gender:Male
  • Location:Malaysia
  • Interests:IT (Graphic Design, Portal, Multimedia)
    & Media Production (Audio, Video, Special Effect, Green Screen).
  • Kepakaran:Multimedia, Portal, Audio Video Production.
  • Freelance:Tidak

Posted 22 June 2002 - 08:43 AM

perghh..!!! detail giler tu...

good info...!!

#12 Guest_aty_na_*

  • Tetamu

Posted 22 June 2002 - 12:42 PM

assalamualaikum..wbt kepada semua..

terima kasih banyak2 saya ucapkan kepada anda semua....wah tak sangka sungguh detail sekali penerangannya....ini adalah satu info yg amat berguna bagi saya......tq very much

laugh.gif smile.gif2

#13 Guest_ephol_*

  • Tetamu

Posted 22 June 2002 - 01:16 PM

aty_na : baca sampai abis aper yg mankuantan tulis tu, print kalau boleh

mankuantan : gilossss ko ni man... detail giler sampai malas aku nak baca

#14 Guest_wja_*

  • Tetamu

Posted 23 June 2002 - 02:47 PM

Ni nak tanya,

Boot disk tu boleh copy dr mana? Adakah dlm c:/windows
Apa yg nak dicopy?

TQ

#15 mAnKuAnTaN

    Leftenan

  • Ahli
  • 1,474 posts
  • Gender:Male
  • Location:KeY ELL
  • Interests:komputer dan internet
  • Kepakaran:digital gedget
  • Freelance:Ya

Posted 28 June 2002 - 06:52 PM

Wja:Aku assume ko pakai Win 98... Cara nak create boot disk macam nih...

Ko gi kat Start Menu - Settings - Control Penal - Add Remove Program punya folder...

Kat situ ko klick kat Startup Disk dan create disk...

Utk start up disk ni, memerlukan satu disket 1.44 MB yang kosong, kalau tak kosong, format dulu... Lepas dah create tuh, write protecy dan simpan di tempat yang selamat...

Amin...

Penerangan dlm bahasa inggeris dia macam ni haa...
QUOTE
CREATING A WINDOWS 98/ME DISK

An excellent feature of Windows 98/ME is its boot diskette. Using Windows to create you a Windows 98 boot diskette will give you all the needed files as well as CD-ROM support. To create a Windows 98 boot diskette click Start / Settings / Control Panel / double click the Add Remove programs icon / click the Startup Disk and create disk.


Untuk penerangan dlm bahasa2 yg lain seperti Urdu, Arasalah, Kimunit, Kadazan, Sandoloyo, Tibet... dan sebagainya, sila ajukan pertanyaan anda kepada Ephol.. sekian... smile.gif

#16 Rezdrake

    Leftenan Muda

  • Ahli Professional
  • 810 posts
  • Location:Penang

Posted 30 June 2002 - 03:18 PM

Assalamualaikum,

saudara wja juga boleh download Bootdisk di site ni juga
http://bootdisk.com/





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users